This EveryThang3D adapter provides the structure for you to make your own battery adapter. Built your own circuitry (not included) to interface the Hart 20-Volt battery with the Ridgid 18-Volt power tool. This do-it-yourself adapter easily snaps onto the Hart 20V battery and easily slides into the Ridgid 18V power tool. And it's easy to remove the battery and the power tool.
Note: This product is a do-it-yourself (DIY) project. Customers use this adapter to build stuff for various different purposes. There are no instructions as you can build whatever you want. Use listing photos for reference. There may not be enough photo space to show dimensions; contact us for dimensions if that's the case.
WARNING: Electrical DIY projects are potentially dangerous to you and may cause damage to your power tool and/or battery. Expert installation may be required. We do not guarantee that any brand battery will work on any brand power tool. Using this adapter on your power tool and/or your battery may void the manufacturers' warranties. You are responsible for the circuitry you build to interface with the battery and the power tool. We only warranty the physical box/lid, which we manufacture, from physical defect. We do not provide liability nor warranty to your circuitries, to your batteries, to your power tools, and to your health.
You will need four Dahszhi Male Spade Quick Splice Terminals 6.3mm Brass Non-Insulated Wire Crimp Connectors to provide electrical contacts. Two contacts are included when you order the lid (Ridgid power tool interface). Two contacts are included when you order the box (Hart battery interface).
You will need four #4-40x0.5" screws to fasten the lid onto the box. The screw are included when you order the lid.
WARNING: Please do not over tighten the screws. Over tighten metal screw on plastic part will cause the plastic to crack. Torquing the screws to finger tight is more than sufficient for this product. Do not use a power tool nor electric drill to tighten the screws.
Power tools, tools, batteries, and other equipment used for the illustration of this container are not included.
Have an idea to make this product even better? Let us know.
This product is made to order. Ready to ship in 3-5 business days.
EveryThang3D improved the original designs. Original designs made available via Creative Commons - Attribution license here:
https://www.thingiverse.com/thing:4645618 (by Aleksandr Alekseev aka GunSmoker)
Official EveryThang3D retail partner on Shopify. EveryThang3D Performance Technology Plus (PT+) products are 3D printed using PETG plastic, shown in photo, and are exceptionally strong. We can print to order any products in the EveryThang3D full catalog at a huge discount. Look at the full catalog and tell us what you want:
https://www.shapeways.com/shops/everything3d
Note: This product is a do-it-yourself (DIY) project. Customers use this adapter to build stuff for various different purposes. There are no instructions as you can build whatever you want. Use listing photos for reference. There may not be enough photo space to show dimensions; contact us for dimensions if that's the case.
WARNING: Electrical DIY projects are potentially dangerous to you and may cause damage to your power tool and/or battery. Expert installation may be required. We do not guarantee that any brand battery will work on any brand power tool. Using this adapter on your power tool and/or your battery may void the manufacturers' warranties. You are responsible for the circuitry you build to interface with the battery and the power tool. We only warranty the physical box/lid, which we manufacture, from physical defect. We do not provide liability nor warranty to your circuitries, to your batteries, to your power tools, and to your health.
You will need four Dahszhi Male Spade Quick Splice Terminals 6.3mm Brass Non-Insulated Wire Crimp Connectors to provide electrical contacts. Two contacts are included when you order the lid (Ridgid power tool interface). Two contacts are included when you order the box (Hart battery interface).
You will need four #4-40x0.5" screws to fasten the lid onto the box. The screw are included when you order the lid.
WARNING: Please do not over tighten the screws. Over tighten metal screw on plastic part will cause the plastic to crack. Torquing the screws to finger tight is more than sufficient for this product. Do not use a power tool nor electric drill to tighten the screws.
Power tools, tools, batteries, and other equipment used for the illustration of this container are not included.
Have an idea to make this product even better? Let us know.
This product is made to order. Ready to ship in 3-5 business days.
EveryThang3D improved the original designs. Original designs made available via Creative Commons - Attribution license here:
https://www.thingiverse.com/thing:4645618 (by Aleksandr Alekseev aka GunSmoker)
Official EveryThang3D retail partner on Shopify. EveryThang3D Performance Technology Plus (PT+) products are 3D printed using PETG plastic, shown in photo, and are exceptionally strong. We can print to order any products in the EveryThang3D full catalog at a huge discount. Look at the full catalog and tell us what you want:
https://www.shapeways.com/shops/everything3d