Note: The top is the "Lid". The bottom is the "Box". To get the whole thing, you'll need to order the "Lid and Box".
Internal Dimension:
114mm x 80mm x 50mm
4.49" x 3.15" x 1.97"
This EveryThang3D battery box provides the structure for you to make your own battery pack for the Ridgid 18V power tool. This DIY battery box has enough volume to hold ten 21700 lithium in 5S2P configuration. Built your own circuitry (not included) to interface the lithium battery with the Ridgid 18-Volt power tool. This do-it-yourself battery box easily slides into the Ridgid 18V power tool. And it's easy to remove the battery pack.
Note: This product is a do-it-yourself (DIY) project. Customers use this battery box to build stuff for various different purposes. There are no instructions as you can build whatever you want. Use listing photos for reference. There may not be enough photo space to show dimensions; contact us for dimensions if that's the case.
WARNING: Electrical DIY projects are potentially dangerous to you and may cause damage to your power tool and/or battery. Expert installation may be required. We do not guarantee that any brand battery will work on any brand power tool. Using this battery box on your power tool and/or your battery may void the manufacturers' warranties. You are responsible for the circuitry you build to interface with the battery and the power tool. We only warranty the physical box/lid, which we manufacture, from physical defect. We do not provide liability nor warranty to your circuitries, to your batteries, to your power tools, and to your health.
You will need two Dahszhi Male Spade Quick Splice Terminals 6.3mm Brass Non-Insulated Wire Crimp Connectors to provide electrical contacts. Two contacts are included when you order the lid (Ridgid power tool interface).
You will need four #4-40x0.5" screws to fasten the lid onto the box. The screw are included when you order the lid.
WARNING: Please do not over tighten the screws. Over tighten metal screw on plastic part will cause the plastic to crack. Torquing the screws to finger tight is more than sufficient for this product. Do not use a power tool nor electric drill to tighten the screws.
Power tools, tools, batteries, and other equipment used for the illustration of this container are not included.
Have an idea to make this product even better? Let us know.
This product is made to order. Ready to ship in 3-5 business days.
EveryThang3D improved the original design. Original design made available via Creative Commons - Attribution license here:
https://www.thingiverse.com/thing:4645618 (by Aleksandr Alekseev aka GunSmoker)
Official EveryThang3D retail partner on Shopify. EveryThang3D Performance Technology Plus (PT+) products are 3D printed using PETG plastic, shown in photo, and are exceptionally strong. We can print to order any products in the EveryThang3D full catalog at a huge discount. Look at the full catalog and tell us what you want:
https://www.shapeways.com/shops/everything3d